Leaching optimization of copper from converter slag ash

authors:

avatar Kamil Rozrokh 1 , avatar Saeb Ahmadi 2 , *

Department of Chemical Engineering, School of Chemical Engineering, Kurdistan University, Sanandaj, Iran
Department of Chemical Engineering, School of Chemical Engineering, Tarbiat Modares University, Tehran, Iran

how to cite: Rozrokh K , Ahmadi S . Leaching optimization of copper from converter slag ash. J Health Rep Technol. 2016;2(1):e74056. 

Abstract

The main objective of this work was to determine the adequacy of Response Surface Methodology (RSM) in optimizing conditions for copper solubilization from a converter slag using sulfuric acid and to test the polynomial model associated with RSM. RSM was applied for optimization of the main factors, including initial pH, initial temperature, and pulp density. The maximum copper recovery was 100% under the optimal conditions of initial pH of 3, 1.4 g/100mL initial density, and 55°C. The confirmation test showed that the model can predict conditions accurately.

Fulltext

The full text of this article is available on PDF.

References

  • 1.

    The references of this article is available on PDF.